Central Florida Widgets recently installed a new router in their Apopka office. Complete the network installation by performing the initial router configurations and configuring RIPv2 routing using the router command line interface (CLI) on the Apopka router. Configure the router per the following requirements: Name of the router is Gotha Enable-secret password is cisco The password to access user EXEC mode using the console is class The password to allow telnet access to the router is class IPv4 addresses must be configured as follows: Ethernet network 209.165.201.0/27 – router has second assignable host address in subnet. Serial network is 192.0.2.128/28 – router has last assignable host address in the subnet. Interfaces should be enabled. Routing protocol is RIPv2. Instruction: To configure the router (Gotha) click on the console host icon that is connected to a router by a serial console cable (shown in the diagram as a d...