The below are mock questions that were about to appear in exam CCNA 200-120.
Updated : 14th October 2013
Download the Latest 200-120 dumps : Click Here
This file requires Visual Cert Exam Suite: Click Here
Download the latest 200-120 dumps in DOCX format :
Chapter 1, Chapter 2, Chapter 3, Chapter 4, Chapter 5, Chapter 6, Chapter 7, Chapter 8, Chapter 9, Chapter 10, Chapter 11, Chapter 12
CCNA EIGRP Simulation
CCNA ACL2 Simulation
Question 1
Which three are the components of SNMP? (Choose three)
A. MIB
B. SNMP Manager
C. SysLog Server
D. SNMP Agent
E. Set
Answer : A, B, D
Question 2
What are the Popular destinations for syslog messages to be saved?
A. Flash
B. The logging buffer .RAM
C. The console terminal
D. Other terminals
E. Syslog server
Answer: B, C, E
Question 3
Syslog was configured with a level 3 trap. Which 3 types of logs would be generated (choose three)
A.Emergencies
B.Alerts
C.Critical
D.Errors
E.Warnings
Answer: A, B, C
Question 4
What are the benefit of using Netflow? (Choose three.)
A. Network, Application & User Monitoring
B. Network Planning
C. Security Analysis
D. Accounting/Billing
Answer: A, C, D
Question 5
Which protocol can cause overload on a CPU of a managed device?
A. Netflow
B. WCCP
C. IP SLA
D. SNMP
Answer: D
Question 6
Which one of these is a valid HSRP Virtual Mac Address?
A. 0000.0C07.AC01
B. 0000.5E00.0110
C. 0007.B400.1203
D. 0000.C007.0201
Answer: A
Question 7
What are the three things that the Netflow uses to consider the traffic to be in a same flow?
A. IP address
B. Interface name
C. Port numbers
D. L3 protocol type
E. MAC address
Answer: A, C, D
Question 8
What is the alert message generated by SNMP agents called ?
A. TRAP
B. INFORM
C. GET
D. SET
Answer: a,b
Question 9
Which three features are added in SNMPv3 over SNMPv2?
A. Message Integrity
B. Compression
C. Authentication
D. Encryption
E. Error Detection
Answer: A, C, D
Question 10
In a GLBP network, who is responsible for the arp request?
A. AVF
B. AVG
C. Active Router
D. Standby Router
Answer: B
Question 11
What levels will be trapped if the administrator executes the command
router(cfg)#logging trap 4
(Choose four.)
A. Emergency
B. Notice
C. Alert
D. Error
E. Warning
Answer: A, C, D, E
Question 12
What are the three things that netflow uses to consider the traffic to be in a same flow?
A. IP address
B. Interface name
C. Port numbers
D. L3 protocol type
Answer: A, C, D
Question 13
Which is true about OSPF router-id? (Choose two .)
A. It is used for type 1 router LSA
B. Highest IP address of the loopback is used
C. router-id needs to be matched on ospf neighbors
D. router-id is 16 bit
Answer : A, B
Question 14
In GLBP, which router will respond to client ARP requests?
A. The active virtual gateway will reply with one of four possible virtual MAC addresses.
B. All GLBP member routers will reply in round-robin fashion.
C. The active virtual gateway will reply with its own hardware MAC address.
D. The GLBP member routers will reply with one of four possible burned in hardware addresses.
Answer: A
Question 15
Which statement describes VRRP object tracking?
A. It monitors traffic flow and link utilization.
B. It ensures the best VRRP router is the virtual router master for the group.
C. It causes traffic to dynamically move to higher bandwidth links
D. It thwarts man-in-the-middle attacks.
Answer: B
Question 16
What are three benefits of GLBP? (Choose three.)
A. GLBP supports up to eight virtual forwarders per GLBP group.
B. GLBP supports clear text and MD5 password authentication between GLBP group members.
C. GLBP is an open source standardized protocol that can be used with multiple vendors.
D. GLBP supports up to 1024 virtual routers.
E. GLBP can load share traffic across a maximum of four routers.
F. GLBP elects two AVGs and two standby AVGs for redundancy.
Answer : B, D, E
Question 17
Which three statements about HSRP operation are true? (Choose three.)
A. The virtual IP address and virtual MA+K44C address are active on the HSRP Master router.
B. The HSRP default timers are a 3 second hello interval and a 10 second dead interval.
C. HSRP supports only clear-text authentication.
D. The HSRP virtual IP address must be on a different subnet than the routers' interfaces on the same LAN.
E. The HSRP virtual IP address must be the same as one of the router's interface addresses on the LAN.
F. HSRP supports up to 255 groups per interface, enabling an administrative form of load balancing.
Answer : A, B, F
Question 18
Which three statements about Syslog utilization are true? (Choose three.)
A. Utilizing Syslog improves network performance.
B. The Syslog server automatically notifies the network administrator of network problems.
C. A Syslog server provides the storage space necessary to store log files without using router disk space.
D. There are more Syslog messages available within Cisco IOS than there are comparable SNMP trap messages.
E. Enabling Syslog on a router automatically enables NTP for accurate time stamping.
F. A Syslog server helps in aggregation of logs and alerts.
Answer: C, D, F
Question 19
A network administrator enters the following command on a router: logging trap 3. What are three message types that will be sent to the Syslog server? (Choose three.)
A. informational
B. emergency
C. warning
D. critical
E. debug
F. error
Answer: B, D, F
Question 20
What is the default Syslog facility level?
A. local4
B. local5
C. local6
D. local7
Answer: D
Question 21
What command instructs the device to timestamp Syslog debug messages in milliseconds?
A. service timestamps log datetime localtime
B. service timestamps debug datetime msec
C. service timestamps debug datetime localtime
D. service timestamps log datetime msec
Answer: B
Question 22
Which three statements about the features of SNMPv2 and SNMPv3 are true? (Choose three.)
A. SNMPv3 enhanced SNMPv2 security features
B. SNMPv3 added the Inform protocol message to SNMP.
C. SNMPv2 added the Inform protocol message to SNMP.
D. SNMPv3 added the GetBulk protocol messages to SNMP.
E. SNMPv2 added the GetBulk protocol message to SNMP.
F. SNMPv2 added the GetNext protocol message to SNMP.
Answer: A, C, E
Question 23
What are three reasons to collect Netflow data on a company network? (Choose three.)
A. To identify applications causing congestion.
B. To authorize user network access.
C. To report and alert link up / down instances.
D. To diagnose slow network performance, bandwidth hogs, and bandwidth utilization.
E. To detect suboptimal routing in the network.
F. To confirm the appropriate amount of bandwidth that has been allocated to each Class of Service.
Answer: A, D, F
Question 24
What Netflow component can be applied to an interface to track IPv4 traffic?
A. flow monitor
B. flow record
C. flow sampler
D. flow exporter
Answer: A
Question 25
What Cisco IOS feature can be enabled to pinpoint an application that is causing slow network performance?
A. SNMP
B. Netflow
C. WCCP
D. IP SLA
Answer: B
Question 26
What command visualizes the general NetFlow data on the command line?
A. show ip flow export
B. show ip flow top-talkers
C. show ip cache flow
D. show mls sampling
E. show mls netflow ip
Answer: C
Question 27
What are three values that must be the same within a sequence of packets for Netflow to consider them a network flow? (Choose three.)
A. source IP address
B. source MAC address
C. egress interface
D. ingress interface
E. destination IP address
F. IP next-hop
Answer: A, D, E
Question 28
What are three factors a network administrator must consider before implementing Netflow in the network? (Choose three.)
A. CPU utilization
B. where Netflow data will be sent
C. number of devices exporting Netflow data
D. port availability
E. SNMP version
F. WAN encapsulation
Answer: A, B, C
Question 29
What are two enhancements that OSPFv3 supports over OSPFv2? (Choose two.)
A. It requires the use of ARP.
B. It can support multiple IPv6 subnets on a single link.
C. It supports up to 2 instances of OSPFv3 over a common link.
D. It routes over links rather than over networks.
Answer: B, D
Question 30
When a router undergoes the exchange protocol within OSPF, in what order does it pass through each state?
A. exstart state > loading state > exchange state > full state
B. exstart state > exchange state > loading state > full state
C. exstart state > full state > loading state > exchange state
D. loading state > exchange state > full state > exstart state
Answer: B
Question 31
What are the Popular destinations for syslog messages to be saved?
A. Flash
B. The logging buffer RAM
C. The console terminal
D. Other terminals
E. Syslog server
Answer: B, C, E
Question 32
What are the benefit of using Netflow? (Choose three.)
A. Network, Application & User Monitoring
B. Network Planning
C. Security Analysis
D. Accounting/Billing
Answer: A, C, D
Updated : 14th October 2013
Download the Latest 200-120 dumps : Click Here
This file requires Visual Cert Exam Suite: Click Here
Download the latest 200-120 dumps in DOCX format :
Chapter 1, Chapter 2, Chapter 3, Chapter 4, Chapter 5, Chapter 6, Chapter 7, Chapter 8, Chapter 9, Chapter 10, Chapter 11, Chapter 12
CCNA EIGRP Simulation
CCNA ACL2 Simulation
Question 1
Which three are the components of SNMP? (Choose three)
A. MIB
B. SNMP Manager
C. SysLog Server
D. SNMP Agent
E. Set
Answer : A, B, D
Question 2
What are the Popular destinations for syslog messages to be saved?
A. Flash
B. The logging buffer .RAM
C. The console terminal
D. Other terminals
E. Syslog server
Answer: B, C, E
Question 3
Syslog was configured with a level 3 trap. Which 3 types of logs would be generated (choose three)
A.Emergencies
B.Alerts
C.Critical
D.Errors
E.Warnings
Answer: A, B, C
Question 4
What are the benefit of using Netflow? (Choose three.)
A. Network, Application & User Monitoring
B. Network Planning
C. Security Analysis
D. Accounting/Billing
Answer: A, C, D
Question 5
Which protocol can cause overload on a CPU of a managed device?
A. Netflow
B. WCCP
C. IP SLA
D. SNMP
Answer: D
Question 6
Which one of these is a valid HSRP Virtual Mac Address?
A. 0000.0C07.AC01
B. 0000.5E00.0110
C. 0007.B400.1203
D. 0000.C007.0201
Answer: A
Question 7
What are the three things that the Netflow uses to consider the traffic to be in a same flow?
A. IP address
B. Interface name
C. Port numbers
D. L3 protocol type
E. MAC address
Answer: A, C, D
Question 8
What is the alert message generated by SNMP agents called ?
A. TRAP
B. INFORM
C. GET
D. SET
Answer: a,b
Question 9
Which three features are added in SNMPv3 over SNMPv2?
A. Message Integrity
B. Compression
C. Authentication
D. Encryption
E. Error Detection
Answer: A, C, D
Question 10
In a GLBP network, who is responsible for the arp request?
A. AVF
B. AVG
C. Active Router
D. Standby Router
Answer: B
Question 11
What levels will be trapped if the administrator executes the command
router(cfg)#logging trap 4
(Choose four.)
A. Emergency
B. Notice
C. Alert
D. Error
E. Warning
Answer: A, C, D, E
Question 12
What are the three things that netflow uses to consider the traffic to be in a same flow?
A. IP address
B. Interface name
C. Port numbers
D. L3 protocol type
Answer: A, C, D
Question 13
Which is true about OSPF router-id? (Choose two .)
A. It is used for type 1 router LSA
B. Highest IP address of the loopback is used
C. router-id needs to be matched on ospf neighbors
D. router-id is 16 bit
Answer : A, B
Question 14
In GLBP, which router will respond to client ARP requests?
A. The active virtual gateway will reply with one of four possible virtual MAC addresses.
B. All GLBP member routers will reply in round-robin fashion.
C. The active virtual gateway will reply with its own hardware MAC address.
D. The GLBP member routers will reply with one of four possible burned in hardware addresses.
Answer: A
Question 15
Which statement describes VRRP object tracking?
A. It monitors traffic flow and link utilization.
B. It ensures the best VRRP router is the virtual router master for the group.
C. It causes traffic to dynamically move to higher bandwidth links
D. It thwarts man-in-the-middle attacks.
Answer: B
Question 16
What are three benefits of GLBP? (Choose three.)
A. GLBP supports up to eight virtual forwarders per GLBP group.
B. GLBP supports clear text and MD5 password authentication between GLBP group members.
C. GLBP is an open source standardized protocol that can be used with multiple vendors.
D. GLBP supports up to 1024 virtual routers.
E. GLBP can load share traffic across a maximum of four routers.
F. GLBP elects two AVGs and two standby AVGs for redundancy.
Answer : B, D, E
Question 17
Which three statements about HSRP operation are true? (Choose three.)
A. The virtual IP address and virtual MA+K44C address are active on the HSRP Master router.
B. The HSRP default timers are a 3 second hello interval and a 10 second dead interval.
C. HSRP supports only clear-text authentication.
D. The HSRP virtual IP address must be on a different subnet than the routers' interfaces on the same LAN.
E. The HSRP virtual IP address must be the same as one of the router's interface addresses on the LAN.
F. HSRP supports up to 255 groups per interface, enabling an administrative form of load balancing.
Answer : A, B, F
Question 18
Which three statements about Syslog utilization are true? (Choose three.)
A. Utilizing Syslog improves network performance.
B. The Syslog server automatically notifies the network administrator of network problems.
C. A Syslog server provides the storage space necessary to store log files without using router disk space.
D. There are more Syslog messages available within Cisco IOS than there are comparable SNMP trap messages.
E. Enabling Syslog on a router automatically enables NTP for accurate time stamping.
F. A Syslog server helps in aggregation of logs and alerts.
Answer: C, D, F
Question 19
A network administrator enters the following command on a router: logging trap 3. What are three message types that will be sent to the Syslog server? (Choose three.)
A. informational
B. emergency
C. warning
D. critical
E. debug
F. error
Answer: B, D, F
Question 20
What is the default Syslog facility level?
A. local4
B. local5
C. local6
D. local7
Answer: D
Question 21
What command instructs the device to timestamp Syslog debug messages in milliseconds?
A. service timestamps log datetime localtime
B. service timestamps debug datetime msec
C. service timestamps debug datetime localtime
D. service timestamps log datetime msec
Answer: B
Question 22
Which three statements about the features of SNMPv2 and SNMPv3 are true? (Choose three.)
A. SNMPv3 enhanced SNMPv2 security features
B. SNMPv3 added the Inform protocol message to SNMP.
C. SNMPv2 added the Inform protocol message to SNMP.
D. SNMPv3 added the GetBulk protocol messages to SNMP.
E. SNMPv2 added the GetBulk protocol message to SNMP.
F. SNMPv2 added the GetNext protocol message to SNMP.
Answer: A, C, E
Question 23
What are three reasons to collect Netflow data on a company network? (Choose three.)
A. To identify applications causing congestion.
B. To authorize user network access.
C. To report and alert link up / down instances.
D. To diagnose slow network performance, bandwidth hogs, and bandwidth utilization.
E. To detect suboptimal routing in the network.
F. To confirm the appropriate amount of bandwidth that has been allocated to each Class of Service.
Answer: A, D, F
Question 24
What Netflow component can be applied to an interface to track IPv4 traffic?
A. flow monitor
B. flow record
C. flow sampler
D. flow exporter
Answer: A
Question 25
What Cisco IOS feature can be enabled to pinpoint an application that is causing slow network performance?
A. SNMP
B. Netflow
C. WCCP
D. IP SLA
Answer: B
Question 26
What command visualizes the general NetFlow data on the command line?
A. show ip flow export
B. show ip flow top-talkers
C. show ip cache flow
D. show mls sampling
E. show mls netflow ip
Answer: C
Question 27
What are three values that must be the same within a sequence of packets for Netflow to consider them a network flow? (Choose three.)
A. source IP address
B. source MAC address
C. egress interface
D. ingress interface
E. destination IP address
F. IP next-hop
Answer: A, D, E
Question 28
What are three factors a network administrator must consider before implementing Netflow in the network? (Choose three.)
A. CPU utilization
B. where Netflow data will be sent
C. number of devices exporting Netflow data
D. port availability
E. SNMP version
F. WAN encapsulation
Answer: A, B, C
Question 29
What are two enhancements that OSPFv3 supports over OSPFv2? (Choose two.)
A. It requires the use of ARP.
B. It can support multiple IPv6 subnets on a single link.
C. It supports up to 2 instances of OSPFv3 over a common link.
D. It routes over links rather than over networks.
Answer: B, D
Question 30
When a router undergoes the exchange protocol within OSPF, in what order does it pass through each state?
A. exstart state > loading state > exchange state > full state
B. exstart state > exchange state > loading state > full state
C. exstart state > full state > loading state > exchange state
D. loading state > exchange state > full state > exstart state
Answer: B
Question 31
What are the Popular destinations for syslog messages to be saved?
A. Flash
B. The logging buffer RAM
C. The console terminal
D. Other terminals
E. Syslog server
Answer: B, C, E
Question 32
What are the benefit of using Netflow? (Choose three.)
A. Network, Application & User Monitoring
B. Network Planning
C. Security Analysis
D. Accounting/Billing
Answer: A, C, D
Thanks¡¡
ReplyDeleteTusen takk!
ReplyDeleteHi guys none these question above was in my teste today 200-120. but its very easy question...good luck for all !
ReplyDeleteHi ,plz can uh show us how to solve most five difficult question that its mark is 500
DeletePlz
I got Q8 but it only gave me one choice answer. I answered A. I passed the test though. :)
ReplyDeletehi! I would know if the lab simulation is the same at the old ccna exam (640-802). Thanks in advanced.
ReplyDeleteCan you please post the pdf format? You said that you would help us on examcollection, please help us out tut!!!!
ReplyDelete3 out of these 10 questions were asked in my CCNA R&S exam. scored 972/1000 today.
ReplyDeleteGood work examtut.com
two were based on the NETFLOW SNMP
one was of the MAC address HSRP
Hello Guys I hope you will be fine there.Now New CCNA (200-120) and CCNA security (640-554) Vouchers on special discount of 58% for World wide, with six months expiry date till you purchase. Each voucher cost 70USD.
ReplyDeleteDetails Required For CCNA Voucher For Discount Processing:
1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)
2-Country.
3-City.
4-State.
5-Pin Code (or Area Code)
6-Residential Address (or where you can collect your Certificate or further correspondence
can be received)
7-Date of birth
Add me on Skype through this information which is written below:
Skype Name: rockon660
you can also email me at this email address which is written below:
madeelqaiser@gmail.com
If you have any Questions feel free to contact me.
Thanks,
Best regards,
Adeel
passed yesterday , i believe that all new questions came from this list . It was great !
ReplyDeleteHi guys thank you very much for all the info..took the test today pass 903, i had 4 questions from here..
ReplyDeletepassed the exam today 972/1000 !!! very happy & thanx alot Examtut
ReplyDeleteHi admin, in my exam today I found new question about etherchannel command and syslog EIGRP
ReplyDeletewould you please add the updates
thank you
hi admin, your question 32 above is obviously same with question 4. please correct them
ReplyDeletethank you
Hi Admin , your question no.31 is exactly same with questio no.2
ReplyDeleteplease correct it.
thank you
Questions 1, 13, 17, 18, 24, 26 in my exam today. Please note that on question 18 the answers should be B,C,D.
ReplyDeleteThank you very much examtut.com
hello,
ReplyDeleteSomeone can show me how to get the CCNA 200-120 document for download ?
mail me on yabrebeny@yahoo.fr
thank you examtute :) passed CCNA and got several questions from this.
ReplyDeleteThanks Examtut! Took my CCNA exam today and passed 917/1000. Some questions from here showed up so this was helpful. I basically used Jeremy CBT Nuggets, a Todd Lamle CCNA book, 9tut.com simulations and questions and finally examtut.com simulations and qustions.
ReplyDeleteQ4: If think the correct answer is ABD; (C) is not correct, isn't it?
ReplyDeleteQuestion 17
ReplyDeleteWhich three statements about HSRP operation are true? (Choose three.)
A. The virtual IP address and virtual MA+K44C address are active on the HSRP Master router.
B. The HSRP default timers are a 3 second hello interval and a 10 second dead interval.
C. HSRP supports only clear-text authentication.
D. The HSRP virtual IP address must be on a different subnet than the routers' interfaces on the same LAN.
E. The HSRP virtual IP address must be the same as one of the router's interface addresses on the LAN.
F. HSRP supports up to 255 groups per interface, enabling an administrative form of load balancing.
The righ answers are B, E and F
Source: http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/unicast/configuration/guide/l3_hsrp.html#wp1509583
The "Download the Latest 200-120 dumps" link is for HP Blade System.... not for Cisco 200-120!!!!
ReplyDelete===============
ReplyDeleteHi I nailed the new CCNA Exam earlier, with a score of 1000/1000
New questions came accross from http://www.examtut.com/2013/09/new-questions-in-ccna-200-120-hsrp-vrrp.html
but encountered 2 NEW QUESION w/c i havent seen on any dumps:
Q1. What is SNMPv2 authentication procol.
A. Community Strings
B. HMAC-MD5
C. HDMAC-SHA
I answered "B" tho. (not xur if my answer is correct)
Q2 (Etherchannel Questions that goes like this)
Refer to the exhibit. Etherchannel has been configured on Switch1 as shown.
Switch1# conf t
Switch1(config)# interface range gigabitethernet 1/1
Switch1(config)# Channel-group 5 Mode "AUTO"
Switch1#
Switch1(config)# interface range gigabitethernet 1/2
Switch1(config)# Channel-group 5 Mode "AUTO"
Which is the correct command set to configure etherchannel on Switch2?
A.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode auto
B.
Switch2# configure terminal
Switch2(config)# interface range gigabitethemet3/1 -2
Switch2(config-if)# channel-group 5 mode passive
C.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode desirable
D.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode ACTIVE
I may not remember the exact wordings of the question,
but it mainly says "AUTO" on the other switch and asked wat mode should be on the other end?
I put D as my answer, the one with an "ACTIVE" word, not xur if its correct.
anyway i hope some 1 can update the NEW CCNA Questions with ANS with this info.
To all NEW CAndidates? BEST OF LUCK!
Thanks 9tut, examtut and Examcollection.
DUMPS are updated.
CHEERS!
~Mack
"Definition of different authentication and privacy protocols - Currently, the MD5 and SHA authentication protocols and the CBC_DES and CFB_AES_128 privacy protocols are supported in the USM."
DeleteFrom Wiki....it must have been a "Choose Two" question....
For the SNMP quastion:
ReplyDeleteQ1. What is SNMPv2 authentication procol.
A. Community Strings
B. HMAC-MD5
C. HDMAC-SHA
I think the correct answer is (A) as in the below link
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/sm_snmp.html
(B) & (C) is for SNMPv3
Q2 (Etherchannel Questions that goes like this)
ReplyDeleteRefer to the exhibit. Etherchannel has been configured on Switch1 as shown.
Switch1# conf t
Switch1(config)# interface range gigabitethernet 1/1
Switch1(config)# Channel-group 5 Mode "AUTO"
Switch1#
Switch1(config)# interface range gigabitethernet 1/2
Switch1(config)# Channel-group 5 Mode "AUTO"
Which is the correct command set to configure etherchannel on Switch2?
A.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode auto
B.
Switch2# configure terminal
Switch2(config)# interface range gigabitethemet3/1 -2
Switch2(config-if)# channel-group 5 mode passive
C.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode desirable
D.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode ACTIVE
Answer is (C)
LACP- can have only ACTIVE or PASSIVE
PAgP- can have only AUTO or DESIRABLE
since we have AUTO in SWA, then SWB should be DESIRABLE
Good Luck to ALL
The linked dump is for an HP switch product and not 200-101 :(
ReplyDeleteJust passed my test today........
ReplyDeleteThanks to examtut, 9tut, & exam collection.
Simulations:
1. ACL-host B is allowed only web access - different IPs same as Modification 3
2. EIGRP with AS#12
3. ACL - SW can't Ping Router- 3 questions same is in examtut.com
Other questions, is exactly same as the dump (2013-10-12.by.Spintry) on examcollection.com and the above SNMP, Syslog, Netflow
One on Etherchannel:
Network Admin creates a layer 3 Etherchannel, bounding 4 interfaces into channel group 1. On what interface is the IP address configured?
A) the port-channel 1 interface
B) the highest number member interface
C) all member interfaces
D) the lowest number member interface
Answer is A
I also used the dump on examdump.net---was helpful with the Etherchannel questions
Good Luck to all.........
Hello Friend,
ReplyDeleteI cleared today ... Thanks examtut......
Anyone have the New CCNA 200-120 books or Power Point presentations? Share it with me if possible. inamullah@hotmail.com
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteToday clear ccna 200-120 got 917/1000. Thanx examtut.com around 7 new questions from above new questions.. Thanx god,family,friends, 9tut,examtut and everyone who comments... Really best websites
ReplyDeletehey friends i cleared ccna today... everything from examtut new questions http://www.examtut.com/2013/09/new-questions-in-ccna-200-120-hsrp-vrrp.html and all questions are same from 9tut.. be remember that "NOT READ ONLY TO END THE TOPIC, READ TO UNDRSTAND CONCEPT" best of luck... thanx examtut and 9tut.......
ReplyDeleteThis comment has been removed by a blog administrator.
ReplyDeleteMack :
ReplyDeletehttp://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_0_1a/sm_snmp.html
snmp v2 uses community strings for an authentication type and snmp v3 has HMAC-MD5 or HMAC-SHA
dear all,
ReplyDeleteI will be having exam on the 31st of December 2013.. can anyone tell me how to download the simulations for practice.. or how am I suppose to get it?
you response will be highly appreciated...
This comment has been removed by a blog administrator.
ReplyDeletewhy the heel you want us to login and give our details for big flux if the above dumps are free.
ReplyDeleteGUYS
http://9tut.comxa.com/
is FAKEEEEEEEEEEEEEE
This comment has been removed by the author.
ReplyDeleteThank God ..passed today 1000/1000 in Egypt
ReplyDeleteThanks you examcollection, 9tut, examtut and sprinty
One more thing for egyptian students stay away from New Horizons centers ..it has a very poor service and the test machines sucks ..it keeps disconnecting during the exam ...after finalizing the EIGRP Lap I had to reconfigure it again as it was no submitted:S
3 laps
========
Studied this dumps No new question out of those dumps and espically the new questions because I got about 15 or 20 of them:
http://www.examcollection.com/cisco/Cisco.Test-inside.200-120.v2013-11-04.by.E-Z404.29q.vce.file.html
http://www.examcollection.com/cisco/Cisco.Actualtests.200-120.v2013-10-01.by.examtut.278q.vce.file.html
Or
http://www.examcollection.com/cisco/Cisco.Actualtests.200-120.v2013-10-12.by.Spintry.299q.vce.file.html
Have a look on examtut as well:
http://www.examtut.com/2013/09/new-questions-in-ccna-200-120-hsrp-vrrp.html
ACL 1
http://www.examtut.com/2013/09/access-control-list-acl-simlet.html
ACL 2 ( Modification 4 but for host C not d)
http://www.examtut.com/2013/08/ccna-access-list-control-acl-simulation.html
access-list 100 permit tcp host 192.168.33.3 host 172.22.242.23 eq 80
access-list 100 deny ip any host 172.22.242.23
access-list 100 permit ip any any
EIGRP but AS 12 or 212
They added an irrelvant network on the main Router I think 192.168.52.0
No passive interfaces is already added this time from their side.
IP default network and ip route are added as well.
simply correct the AS number on the new router and add it on the main one.
Questions that are still in my mind:
https://drive.google.com/file/d/0B5a0xdDRJqewUVhWRlBsMTNSQzQ/edit?usp=sharing
Passed my exam yesterday with 985/1000.
ReplyDeleteSimlet are ACL, ALC 2, EIGRP.
Study material: www.9tut.com everything on 200-120, http://www.examtut.com/2013/09/new-questions-in-ccna-200-120-hsrp-vrrp.html for new question, http://www.examcollection.com/cisco/Cisco.Actualtests.200-120.v2013-10-01.by.examtut.278q.vce.file.html for valid dumps
Hi all,
ReplyDeleteQ4 and Q32
Anyone can help to check the correct answer.
http://www.cisco.com/en/US/products/ps6601/products_ios_protocol_group_home.html
"Denial of Service monitoring capabilities, and network monitoring."
Thank so much
This comment has been removed by a blog administrator.
ReplyDeleteThanks God I passed today 1000/1000
ReplyDeletethanks examcollection, 9tut, examtut and spintry
I got 3 sims
ACL 1 , 2 & EIGRP
two new questions
One on Etherchannel:
Network Admin creates a layer 3 Etherchannel, bounding 4 interfaces into channel group 1. On what interface is the IP address configured?
A) the port-channel 1 interface
B) the highest number member interface
C) all member interfaces
D) the lowest number member interface
Answer is A
one for For the SNMP :
Q1. What is SNMPv2 authentication procol.
A. Community Strings
B. HMAC-MD5
C. HDMAC-SHA
the answer is B
This comment has been removed by a blog administrator.
ReplyDelete@totti2010 are you sure that question of snmp were b? not A?
ReplyDeletehttp://www.cisco.com/en/US/docs/ios-xml/ios/snmp/configuration/xe-3se/3850/nm-snmp-snmpv2c.pdf
ReplyDeleteAuthentication Method: Community String
Authentication Protocol: MD5
Followed your own link:
DeleteSecurity Features in SNMPv2c
Community-based Simple Network Management Protocol Version 2 (SNMPv2c) uses a community-based
form of security. The community of SNMP managers that are able to access the agent MIB is defined by an
IP address access control list (ACL) and password.
The improved error handling support provided by SNMPv2c includes expanded error codes that distinguish
different types of errors; all types of errors are reported through a single error code in SNMPv1. The
following three types of exceptions are also reported: no such object, no such instance, and end of MIB
view. The following are the details of SNMv2c security model:
• Level of security: noAuthNoPriv
• Authentication method: Community String
• Availability of encryption: No
http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_0_1a/sm_snmp.html
ReplyDeleteHere report that the metod is Community Strign for V2 and MD5 for V3
i don't know
I pass my test today 972/1000 thx examtut. thx all!
ReplyDelete@Person_who_gave_exam_on_7_Dec
ReplyDeleteWhich are the valid dumps?
Which are the valid labs?
examtut 278q is still valid
ReplyDeletepassword plz to open Cisco.Actualtests.200-120.v2013-10-01.by.examtut.278q
ReplyDeleteHi
ReplyDeleteI have passed ICND2 (200-100) 973/1000..
CBT Nuggets, Todd Lammle's book , real practice on hardware and of course examtut , and dumps from http://www.examcollection.com/ especially one by RonBoot, helped
and have also
Cisco.Actualtests.200-120.CCNA.v2013-10-01.by.examtut.278q
Although this last dump was for 200-120 , but also helped.
only one question from new topic in which I have to select the virtual mac of HSRP
Two simlets one is in all dumps. In one simlet , which I have never seen anywhere, four questions were asked .there were 5/6 routers running eigrp but all were running same eigrp AS no. and so there was not a single question rather answer about it. One question was about connectivity issue and it was because one of the loopback interface was shutdown , but it was advertise by EIGRP while in other question one of the network was not advertises and in one question problem in forming the neighbour relationship and it was because of passive interface.
Key is to always read the all the answers first , it will save the time which is wasted to look all the config
Most of the dumps with date after 20 Nov are valid { most of them are same anyways}
Thanks God
ReplyDeleteI have passed ICND2 (200-100) 1000/1000.
CBT Nuggets, Chris Bryant , lead2pass dumps (660 approx. questions of old course) and new questions mentioned all here (Including the 2 etherchannel and 1 snmp question in posts below) all helped me getting the score. Labs and simlets same as mentioned here on examtut.com (except as number or ip addresses might be different).
Clear your concepts
prepare:
dumps (as told above),
labs ,simlets on this website and your good to go.
I passed ICND2 today with 1000/1000 score.
ReplyDeleteRegarding the test in my case 95% of the questions were from the examsdeal Website too. A few questions were from the Examtut-Website (look to the “new questions”). Sims as mentioned above Frame relay and EIGRP. EIGRP you can solve with the show ip route and show run command.
Good luck
Biene
I passed these couple of days.
ReplyDeletegot 53, 3 labs.
u will need, ronboots 100q, and the 29 new questions from test-inside.
new questions are also on examsdeal 267
2 of the labs were the showcommand labs from ronboots, the third was a 6 route eigrp lab i never see before, but u dont have to worry, its supereasy and if u fail, it dont matter, cause u can reach the needed points with the the vce files i named above
I think SNMPv2 is Community string not HMAC-MD5
ReplyDeleteHi All,
ReplyDeleteQ4 and Q32
answer: A B D
Hi, just passed my ccna today! These new questions are very valid along with the examtut.279q dump. These are the new questions that I got from here:
ReplyDeleteQuestion 8
What is the alert message generated by SNMP agents called ?
A. TRAP
B. INFORM
C. GET
D. SET
Answer: a,b
Question 16
What are three benefits of GLBP? (Choose three.)
A. GLBP supports up to eight virtual forwarders per GLBP group.
B. GLBP supports clear text and MD5 password authentication between GLBP group members.
C. GLBP is an open source standardized protocol that can be used with multiple vendors.
D. GLBP supports up to 1024 virtual routers.
E. GLBP can load share traffic across a maximum of four routers.
F. GLBP elects two AVGs and two standby AVGs for redundancy.
Answer : B, D, E
Question 20
What is the default Syslog facility level?
A. local4
B. local5
C. local6
D. local7
Answer: D
Question 24
What Netflow component can be applied to an interface to track IPv4 traffic?
A. flow monitor
B. flow record
C. flow sampler
D. flow exporter
Question 28
What are three factors a network administrator must consider before implementing Netflow in the network? (Choose three.)
A. CPU utilization
B. where Netflow data will be sent
C. number of devices exporting Netflow data
D. port availability
E. SNMP version
F. WAN encapsulation
Answer: A, B, C
Question 29
What are two enhancements that OSPFv3 supports over OSPFv2? (Choose two.)
A. It requires the use of ARP.
B. It can support multiple IPv6 subnets on a single link.
C. It supports up to 2 instances of OSPFv3 over a common link.
D. It routes over links rather than over networks.
Forgot to add that the Etherchannel question was also on my test:
ReplyDeleteRefer to the exhibit. Etherchannel has been configured on Switch1 as shown.
Switch1# conf t
Switch1(config)# interface range gigabitethernet 1/1
Switch1(config)# Channel-group 5 Mode "AUTO"
Switch1#
Switch1(config)# interface range gigabitethernet 1/2
Switch1(config)# Channel-group 5 Mode "AUTO"
Which is the correct command set to configure etherchannel on Switch2?
A.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode auto
B.
Switch2# configure terminal
Switch2(config)# interface range gigabitethemet3/1 -2
Switch2(config-if)# channel-group 5 mode passive
C.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode desirable
D.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode ACTIVE
can someone confirm please, The Tab key Works in exam or not ??
ReplyDeleteThis dump not valid any more !
ReplyDelete@Anonymous that says:January 20, 2014 at 5:25 AM "This dump not valid any more ! "
ReplyDeleteYour comment it's about 200-120 or 200-101?
What new dump you know were is correct?
what kind of the new question is different? Please tell more us. Thank's!
Appreciate the person said this "This dump not valid any more ! " could explain it, does it completely invalid?
ReplyDeleteHello Guys good news for you that CCNA discounted vouchers are now available. Now New CCNA (200-120) vouchers on special discount of 58% for World wide, with six months expiry date till you purchase. Each voucher cost 70USD.
ReplyDeleteDetails Required For CCNA Voucher For Discount Processing:
1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)
2-Country.
3-City.
4-State.
5-Pin Code (or Area Code)
6-Residential Address (or where you can collect your Certificate or further correspondence
can be received)
7-Date of birth
Add me on Skype through this information which is written below:
Skype Name: rockon660
you can also email me at this email address which is written below:
madeelqaiser@gmail.com
If you have any Questions feel free to contact me.
Thanks,
Best regards,
Adeel
This dump is 100% valid for 200-120 and for the person who asked about tab, tab is working in simulation questions.
ReplyDeleteAlhamdulillah I just Passed it ...these Qs and http://www.examcollection.com/cisco/Cisco.Actualtests.200-120.v2013-10-01.by.examtut.278q.vce.file.html are 100% valid ...
ReplyDeleteI got 986/1000.
two new Qs :
1 . Benefits of OSPF ....
2. Syslog msg ...
ACL1,ACL2,EIGRP Labs....
Done my CCNA exam today and PASSED with 986 score.... This dump is still 100% valid. and the new questions on
ReplyDeletehttp://www.examtut.com/2013/09/new-questions-in-ccna-200-120-hsrp-vrrp.html
SIMS are ACL,ACL2 and EIGRP . same method but different IPs
Thank you Actualtest
Watson
9tut
CBT nuggets - Jermy
YOU GUYZ ROCK!
Dump is still valid.
ReplyDeleteTook test today and got 976 score.
EIGRP simulation made the router with wrong EIGRP AREA ID as the remote 2. They changed the name of "Interior" to be "South" and name of "Remote 1" to be "North". The question also wanted to allow internet access to remote 2. It was not a big deal since the Perimeter was already advertizing default-network to all. After fixing Area ID, including the route between new and core routers, things were working fine.
Hello Guys good news for you that CCNA discounted and Microsoft vouchers are now available. Now New CCNA (200-120) vouchers on special discount of 58% for World wide, with six months expiry date till you purchase. Each voucher cost 70USD.
ReplyDeleteDetails Required For CCNA Voucher For Discount Processing:
1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)
2-Country.
3-City.
4-State.
5-Pin Code (or Area Code)
6-Residential Address (or where you can collect your Certificate or further correspondence
can be received)
7-Date of birth
Add me on Skype through this information which is written below:
Skype Name: rockon660
you can also email me at this email address which is written below:
madeelqaiser@gmail.com
If you have any Questions feel free to contact me.
Thanks,
Best regards,
Adeel
Plz can s1 help me wth d link to download visual cert exam suite crack
ReplyDeletehttp://thepiratebay.se/torrent/9510380/AVANSET_Visual_CertExam_v3.4.2_Incl_Crack_[TorDigger]
ReplyDeleteI got Complete 200-120 question answers Pass4sure PDF file from http://www.pass4surenow.com/200-120.html at 70% discount price. :)
ReplyDeleteHello guys, i wrote CCNA exam on the 10th of March. i passed it. Thanks to God and examtut. The new simulations above are still valid. Exact questions (Sims) with little modification with the numbers. I got only two or three questions frm the new set of questions.
ReplyDeleteexamtut.278q, watson 314q and Todd Lammle's study is good enough for you to pass 200-120.
Best of Luck for new candidates.
Hello,just completed CCNA (200-101),most of the questions were from Nada dump,but 2 new EIGRP simulations showed up (4+4 questions) why router 1 and 6 cannot form adjacency:invalid K values,why router 1 cannot ping router 6:router 1 have no 10.0.0.5 network listed,just use sh run and sh ip proto commmands to answer all 8 sim questions,detect whether auto-summary is on or off,also one new question about summarization (chose three summary addresses.For Frame Relay sim use sh frame map command.
ReplyDeleteDon't relay on dumps only,but throughly study EIGRP protocol and concept (Todd Lammle's book),otherwise,you are probably about to fail exam.Good luck fellas !
Does anyone know if ICND2 exam has NAT and VTP? I didnt think so but Nada dump has questions on these!
ReplyDeleteI have passed CCNA two days ago with score 972/1000.
ReplyDeleteLabs: ACL2 (modification 3), ACL, EIGRP(no issues with passive interface).
Please do not ignore questions on new topics like: SNMP, Syslog and Netflow, Etherchannel, HSRP/VRRP/GLBP and OSPFV3.
There are a few additional questions on these topics in the following dumps:
http://www.examcollection.com/cisco/Cisco.Passguide.200-120.v2013-12-30.by.Matthew.319q.vce.file.html
and
http://www.examcollection.com/cisco/Cisco.visualexams.200-120.v2014-02-10.by.N.S.32q.vce.file.html
Overall, 9tut is enough for this exam.
Thanks a million 9tut.com
Hi,
ReplyDeleteFrom where I can get latest dumps for CCNA 200-120.Please mail me on vishav.bharti@outlook.com.
Or also let me know location or link from where I can get latest .VCE Simulator.
I shall be thankful to you for this.
I just want to know this is real?
ReplyDeleteWho knows is this real:S
ReplyDeleteNew 200-120 dumps can be found at http://www.passforsure.co/200-120.php
ReplyDeleteThese guys have updated questions
Hi,
ReplyDeletePlease let me know Any one have tried discounted voucher for ccna (200-120) mentioned in above mail from madeelqaise (madeelqaiser@gmail.com), who claimed to give 58 % discount.
Please let me know with your revert on my mail id shruti030388@gmail.com. Please let me know is it real or fake ?
pls ,pls ,pls ,HELP ME !
ReplyDeletei wanna take ccna 200-120 exam in the next month .
is there any body who wants to help me ,please send me a material by babyget@ymail.com
When I am trying to open this "Cisco.Actualtests.200-120.CCNA.v2013-10-01.by.examtut.278q" with Vice Exam Simulator today. It is requesting PASSWORD! Anyone know this??? Please help and much appreciated....
ReplyDeleteGet valid and latest dumps from http://pastpapers-library.blogspot.com/p/blog-page_67.html
ReplyDeleteHello, First of all all these things that you give to the public is enormous knowledge. Thank You EXAMTUT.
ReplyDeleteMy question is that these simulations are the real ones that come in real CCNA certification exam ?
Please anyone can help and send the latest dumps for ccna 200-120 to my email : gsandakel@live.com. I have exam next week… Thanx..
ReplyDelete
ReplyDeleteDear all
Please anyone send a recently dump because the next week I Have the exam CCNA , my mail is alessandro1982to@gmail.com
Thanks
passed the exam today 933/1000 !!! thanks Examtut
ReplyDeletedear guys
ReplyDeleteanyone with the latest dumps,mail me mathayochirchir@gmail.com
please give me the vce file.
ReplyDeletesend it to amachristlan12@gmail.com
thanks
Please pls send me updated dumps on dimpleguy00@yahoo.com
ReplyDeletePlease send me the latest CCNA dumps thastu@gmail.com
ReplyDeleteThanks
Dear all
ReplyDeleteIf anyone have got recent dump of CCNA exam in VCE file, please email me on azee.online@gmail.com
Kind Regards & Thanks
please can someone help me with the latest dump. my email add is obynocyse@gmail.com
ReplyDeleteFrom where I can get latest dumps for CCNA 200-120.Please mail me on stunningkashif@gmail.com.
ReplyDeleteand also let me know location or link from where I can get latest .VCE Simulator.
I shall be thankful to you for this act of kindness
Hy. Can anyone tell where to get latest, and valid of course, 200 120 Cisco ccna dumps. or you can send to my email funkwelle1@gmail.com if you possess that kind of treasure XD
ReplyDeleteHi! Greetings,
ReplyDeleteHope you get this email in your best of health. I would like to inform you that we are dealing with CCNA (R & S) & CCNA security discounted vouchers. By using these discounted vouchers you can reduce CCNA (200-120) examination fees to the extent of 58% and can save a good deal of amount
Skype ID = mursalqaiser
You may study this VCE dump using the web-based VCE Trainer at vcetrainer.com
ReplyDeletehttp://exams.eu.pn/cisco/200-101/index.html
ReplyDeleteHi everybody!!! thanks to examtut for the support in get the CCNA certificaction. I had a 1000/1000 points!!1 Perfect!! the material i sued in the preparation is these 2 post:
ReplyDeletehttp://ciscostudysource.blogspot.com/2015/08/ccna-switching-routing-examenes-study.html
http://ciscostudysource.blogspot.com/2015/08/ccna-exam-dumps-vce-pdf-files.html
i have uploaded the guides, VCE and PDF to MEGA servers so you can down them all!!!
About the exam, if you practice with the dumbs in the post, it will be very easy!! About the labs, if you practice the files in the second post you will be ok, the EIGRP lab is more easy in the exam and the ACL's are very similars!!!
Were you given ospf SIM?
DeleteIf not, do you have the ospf SIM?
Please help.
Were you given ospf SIM?
DeleteIf not, do you have the ospf SIM?
Please help.
Are they updated the CCNA 200-120 exam after adding these questions?
ReplyDeleteHi Guys, Can you confirm those questions are still NOT present in the exam ?
ReplyDeleteThanks,
Great info.
ReplyDeleteI am also shearing some info about Cisco 200-120 dumps. This is difficult to pass the certificated exam but you can make it simple by using exam dumps. or you can check your Cisco exam preparation by using Dumps4download.com.
ExamTut,
ReplyDeleteGreat info about the CCNA exam. There are so many exams out there for different programs and colleges, so your site is a great resource.
Thanks,
Dennis
I recommended www.grades4sure.com/200-120-exam-questions.html dumps is Valid. I took the test on Monday. 92% questions were from the Grades4sure dumps. All questions and answers are valid, You’d better have to understand the technologies.
ReplyDeleteNow you don’t need take any stress about the Cisco 200-120 exam. We provide you latest exam questions 200-120 Practice Exam Questions. Try our free Cisco 200-120 study material. We have professional IT experts provide you important and accurate exam questions for your success. Our experts will help you to pass your 200-120 exam in first attempt. For free Cisco 200-120 Certification Exam visit us on http://www.cisexams.com/200-120-dumps
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteGet updated Cisco 200-125 exam questions from our site. We provide you 100% actual exam questions with answers.
ReplyDeleteWhat is the website address?
DeleteDownload latest cisco ccna 200-125 dumps here..
ReplyDeleteadf.ly/1jUYsS
100% guaranteed...
Get valid CCNA 200-125 question answers from dumps4download.com and prepare your exam in just 24 hours.
ReplyDelete200-125 Exam Prep | Valid 200-125 Dumps | Latest 200-125 Question
judi sabung ayam
ReplyDeleteI gulped all the data in the Cisco 200-125 question and answers which helped me endeavor my last IT exam with a researcher's pen. I realized the response to each question which was certainly a consequence of my committed investigation and the correct decision of Cisco 200-125 dumps. I express profound gratitude to realexamdumps.com for imparting such certainty. I might want to propose it to every one of my companions and partners.
ReplyDeleteAll questions were properly answered, but I think that it will not be enough to learn the topic comprehensively. What do you think?
ReplyDeleteIt happened only with the help of real 100-105 exam dumps that I successfully attempted and passed my Cisco 100-105 study guide. IT experts have, no doubt done an amazing work on DumpsSure. I will prioritize this stuff for all my future exams as well and suggest the same for everyone.
ReplyDelete# 100% Passing Guarantee of 100-105 Exam
# 90 Days Free Updates of 100-105 Exam
# Full Money Back Guarantee on 100-105 Exam
Discount Offer! Use this Coupon Code to get 20% OFF ( Off20 )
HOT EXAMS
AZ-300 Dumps
HPE6-A67 Dumps
220-702 Dumps
SCS-C01 Dumps
AZ-100 Dumps
A00-240 Dumps
JK0-023 Dumps
300-370 Dumps
700-505 Dumps
1V0-605 Dumps
PMI-100 Dumps
2020 Latest DumpsSure Real Exam Dumps (PDF) Instant Download:
https://www.dumpssure.com
This comment has been removed by the author.
ReplyDeleteI have not been impressed by any other exam preparation material as much as I was blown away by certsout allow 50% discount to all the students on every purchase of IT certification Exam dumps pdf. Microsoft Dumps, Citrix Dumps, Cisco Dumps, SAP Dumps, Oracle Dumps and etc https://www.certsout.com/
ReplyDelete