Skip to main content

Posts

New Questions in CCNA 200-120 (HSRP, VRRP, NetFlow, SNMP)

The below are mock questions that were about to appear in exam CCNA 200-120. Updated : 14 th October 2013 Download the Latest 200-120 dumps : Click Here This file requires Visual Cert Exam Suite: Click Here Download the latest 200-120 dumps in DOCX format : Chapter 1 , Chapter 2 , Chapter 3 , Chapter 4 , Chapter 5, Chapter 6, Chapter 7, Chapter 8 , Chapter 9, Chapter 10, Chapter 11, Chapter 12 CCNA EIGRP Simulation CCNA ACL2 Simulation Question 1 Which three are the components of SNMP? (Choose three) A. MIB B. SNMP Manager C. SysLog Server D. SNMP Agent E. Set Answer : A, B, D Question 2 What are the Popular destinations for syslog messages to be saved? A. Flash B. The logging buffer .RAM C. The console terminal D. Other terminals E. Syslog server Answer: B, C, E Question 3 Syslog was configured with a level 3 trap. Which 3 types of logs would...
121 comments
Read more
Recent posts

Windows XP Unattended Installations with Windows Setup Manager

Step 1: Extract Windows XP Deployment Tools 1. Insert the Windows XP Professional CD-ROM. 2. If the Welcome To Microsoft Windows XP screen opens automatically, click Exit to close the screen. 3. In Windows Explorer, Open C drive and create a folder named 'Deploy'. 4. In Windows Explorer, open your CD-ROM drive and locate the 'Support\Tools\' folder. In the Tools folder, double-click Deploy.cab. 5. Select all the files listed in Deploy.cab. 6. Press CTRL+C to copy the selected files. 7. In Windows Explorer, open the Deploy folder that you created on the C drive. 8. In the Deploy folder that you created, paste the files (Shortcut Key: CTRL + V). Step 2: Create a answer file using Windows Setup Manager 1. In Windows Explorer, locate the C:\Deploy folder. 2. Double-click Setupmgr.exe. The Windows Setup Manager Wizard will starts. 3. Click Next. The New Or Existing Answer File page appears. 4. Select Create A New Answer File, and then click...
4 comments
Read more

CCNA RIPv2 Simulation

Central Florida Widgets recently installed a new router in their Apopka office. Complete the network installation by performing the initial router configurations and configuring RIPv2 routing using the router command line interface (CLI) on the Apopka router. To configure the router (Apopka) click on the console host icon that is connected to a router by a serial console cable (shown in the diagram as a dashed black line). Each of the windows can be minimized by clicking on the [-]. You can also reposition a window by dragging it by the title bar. The “Tab” key and most commands that use the “Control” or “Esc” keys are not supported and are not necessary to complete this simulation. The help command does not display all commands of the help system. Configure the router per the following requirements: Name of the router is Apopka Enable-secret password is ish555ana The password to access user EXEC mode using the console is New2Rtr The password to allow te...
14 comments
Read more

CCNA NAT Simulation

  A network associate is configuring a router for the weaver company to provide internet access. The ISP has provided the company six public IP addresses of 198.18.184.105 198.18.184.110. The company has 14 hosts that need to access the internet simultaneously. The hosts in the company LAN have been assigned private space addresses in the range of 192.168.100.17 – 192.168.100.30. The following have already been configured on the router: - The basic router configuration - The appropriate interfaces have been configured for NAT inside and NAT outside. - The appropriate static route have also been configured (since the company will be a stub network, no routing protocol will be required) - All passwords have been temporarily set to “cisco”. The task is to complate the NAT configuration using all IP addresses assigned by the ISP to provide Internet access for the hosts in the Weaver LAN. Functionality can be tested by clicking on the host provided for testing. ...
15 comments
Read more

Cisco Packet Tracer Multi User Connection

Multiuser communication allows multiple point-to-point (peer) connections between multiple instances of Packet Tracer. By allowing communication between Packet Tracer instances, a new door has been opened to a fun, interactive, social, collaborative, and competitive learning environment. Instructors will now be able to create a variety of activities for students to learn in groups that will facilitate greater social interaction between students. Students will benefit from this environment by working together to solve problems and share ideas. Both students and teachers should take full advantage that Multiuser will offer in their learning environment. Technical Information Communicates between instances using PTMP. PTMP is TCP based. By default, uses TCP port 38000, is customizable, and each new instances on the same PC will use the next available port. On by default. UPnP will attempt to establish port forwarding to facilitate home networks. All network co...
2 comments
Read more

Drag and Drop Questions

Question 1 Drag the security feature on the left to the specific security risks they help protect against on the right. (Not all options are used.) Answer : Question 2 Routing has been configured on the local router with these commands: Local(config)#ip route 0.0.0.0 0.0.0.0 192.168.1.1 Local(config)#ip route 10.1.0.0 255.255.255.0 192.168.2.2 Local(config)#ip route 10.1.0.0 255.255.0.0 192.168.3.3 Drag each destination IP address on the left to its correct next hop address on the right Answer: Question 3 The left describes the types of cables, while the right describes the purposes of the cables. Drag the items on the left to the proper locations. (Not all items can be used.) Answer: Question 4 Drag each category on the left to its corresponding router output on the right. Each router output line is in the result of a show ip interface command. (No...
9 comments
Read more

Windows XP Unattended Installations with Windows Setup Manager

Step 1: Extract Windows XP Deployment Tools 1. Insert the Windows XP Professional CD-ROM. 2. If the Welcome To Microsoft Windows XP screen opens automatically, click Exit to close the screen. 3. In Windows Explorer, Open C drive and create a folder named 'Deploy'. 4. In Windows Explorer, open your CD-ROM drive and locate the 'Support\Tools\' folder. In the Tools folder, double-click Deploy.cab. 5. Select all the files listed in Deploy.cab. 6. Press CTRL+C to copy the selected files. 7. In Windows Explorer, open the Deploy folder that you created on the C drive. 8. In the Deploy folder that you created, paste the files (Shortcut Key: CTRL + V). Step 2: Create a answer file using Windows Setup Manager 1. In Windows Explorer, locate the C:\Deploy folder. 2. Double-click Setupmgr.exe. The Windows Setup Manager Wizard will starts. 3. Click Next. The New Or Existing Answer File page appears. 4. Select Create A New Answer File, and then click...
Post a Comment
Read more