Examtut

Central Florida Widgets recently installed a new router in their Apopka office. Complete the network installation by performing the initial router configurations and configuring RIPv2 routing using the router command line interface (CLI) on the Apopka router. To configure the router (Apopka) click on the console host icon that is connected to a router by a serial console cable (shown in the diagram as a dashed black line). Each of the windows can be minimized by clicking on the [-]. You can also reposition a window by dragging it by the title bar. The “Tab” key and most commands that use the “Control” or “Esc” keys are not supported and are not necessary to complete this simulation. The help command does not display all commands of the help system. Configure the router per the following requirements: Name of the router is Apopka Enable-secret password is ish555ana The password to access user EXEC mode using the console is New2Rtr The password to allow te...

  A network associate is configuring a router for the weaver company to provide internet access. The ISP has provided the company six public IP addresses of 198.18.184.105 198.18.184.110. The company has 14 hosts that need to access the internet simultaneously. The hosts in the company LAN have been assigned private space addresses in the range of 192.168.100.17 – 192.168.100.30. The following have already been configured on the router: - The basic router configuration - The appropriate interfaces have been configured for NAT inside and NAT outside. - The appropriate static route have also been configured (since the company will be a stub network, no routing protocol will be required) - All passwords have been temporarily set to “cisco”. The task is to complate the NAT configuration using all IP addresses assigned by the ISP to provide Internet access for the hosts in the Weaver LAN. Functionality can be tested by clicking on the host provided for testing. ...

Multiuser communication allows multiple point-to-point (peer) connections between multiple instances of Packet Tracer. By allowing communication between Packet Tracer instances, a new door has been opened to a fun, interactive, social, collaborative, and competitive learning environment. Instructors will now be able to create a variety of activities for students to learn in groups that will facilitate greater social interaction between students. Students will benefit from this environment by working together to solve problems and share ideas. Both students and teachers should take full advantage that Multiuser will offer in their learning environment. Technical Information Communicates between instances using PTMP. PTMP is TCP based. By default, uses TCP port 38000, is customizable, and each new instances on the same PC will use the next available port. On by default. UPnP will attempt to establish port forwarding to facilitate home networks. All network co...

Question 1 Drag the security feature on the left to the specific security risks they help protect against on the right. (Not all options are used.) Answer : Question 2 Routing has been configured on the local router with these commands: Local(config)#ip route 0.0.0.0 0.0.0.0 192.168.1.1 Local(config)#ip route 10.1.0.0 255.255.255.0 192.168.2.2 Local(config)#ip route 10.1.0.0 255.255.0.0 192.168.3.3 Drag each destination IP address on the left to its correct next hop address on the right Answer: Question 3 The left describes the types of cables, while the right describes the purposes of the cables. Drag the items on the left to the proper locations. (Not all items can be used.) Answer: Question 4 Drag each category on the left to its corresponding router output on the right. Each router output line is in the result of a show ip interface command. (No...

Step 1: Extract Windows XP Deployment Tools 1. Insert the Windows XP Professional CD-ROM. 2. If the Welcome To Microsoft Windows XP screen opens automatically, click Exit to close the screen. 3. In Windows Explorer, Open C drive and create a folder named 'Deploy'. 4. In Windows Explorer, open your CD-ROM drive and locate the 'Support\Tools\' folder. In the Tools folder, double-click Deploy.cab. 5. Select all the files listed in Deploy.cab. 6. Press CTRL+C to copy the selected files. 7. In Windows Explorer, open the Deploy folder that you created on the C drive. 8. In the Deploy folder that you created, paste the files (Shortcut Key: CTRL + V). Step 2: Create a answer file using Windows Setup Manager 1. In Windows Explorer, locate the C:\Deploy folder. 2. Double-click Setupmgr.exe. The Windows Setup Manager Wizard will starts. 3. Click Next. The New Or Existing Answer File page appears. 4. Select Create A New Answer File, and then click...

SNMPv2 vs SNMPv3 Internet Protocol (IP) networks use managing devices such as Simple Network Management Protocol (SNMP) to monitor network attached devices. In a computer network, a group of devices are attached, and they are managed and monitored by a manager. An agent, which is a software module in a managed device, reports information through the SNMP to the manager which has a Network Management System (NMS) that executes the applications that monitor and control managed devices. There are seven SNMP protocol data units (PDU): GetRequest – request to retrieve the value of a variable from the manager to the agent. SetRequest – request to change the value of a variable from the manager to the agent. GetNextRequest – request to find variables from the manager to the agent. GetBulkRequest – enhanced version of GetNextRequest. Response – reply from the agent to the manager through the return of variables. Trap – simultaneous message from the agent to the man...

Refer to the exhibit. Host A pings interface S0/0 on router 3. What is the TTL value for that ping? A. 252 B. 253 C. 254 D. 255 Answer : B Explanation: The TTL or Time-To-Live gives you an indication of the number of routers between the source and destination. The TTL is used to prevent an IP packet from looping inside an IP network and causing a network meltdown. The initial TTL packet value for an IP packet is 255 and then it is decremented by 1 each time it encounters a router. When this value reaches 0, the packet is discarded by a router. The TTL value is contained in each IP packet including ICMP packets. The TTL value given by the ping command is in fact the TTL value of an echo_response packet. By default, Windows will decrease the TTL by 128 and Ubuntu Linux by 192. The above the exact topology of this questions. I used 10.0.0.1 for Host A’s IP address and 12.0.0.2 for R3 S0/0’s IP address. All router has been config...