Skip to main content

Host A pings interface S0/0 on router 3. What is the TTL value for that ping?

Refer to the exhibit.

image

Host A pings interface S0/0 on router 3. What is the TTL value for that ping?

A. 252
B. 253
C. 254
D. 255


Answer : B


Explanation:

The TTL or Time-To-Live gives you an indication of the number of routers between the source and destination. The TTL is used to prevent an IP packet from looping inside an IP network and causing a network meltdown. The initial TTL packet value for an IP packet is 255 and then it is decremented by 1 each time it encounters a router. When this value reaches 0, the packet is discarded by a router. The TTL value is contained in each IP packet including ICMP packets. The TTL value given by the ping command is in fact the TTL value of an echo_response packet. By default, Windows will decrease the TTL by 128 and Ubuntu Linux by 192.

ping253topo

The above the exact topology of this questions. I used 10.0.0.1 for Host A’s IP address and 12.0.0.2 for R3 S0/0’s IP address. All router has been configured with EIGRP routing protocol. And following is the output of ping 12.0.0.2.

ping253

Now the TTL value is 253.

Labels:

Comments

  1. AnonymousNovember 26, 2014 at 1:06 AM

    excellent

    ReplyDelete
  2. AnonymousJune 21, 2016 at 10:17 PM

    good explanation,

    ReplyDelete
  3. UnknownApril 1, 2017 at 3:35 AM

    Very nice explanation. We need all the questions which are asked in CCNA or CCNP exam questions with explanation. This will be most appreciate.we Hope for this. Thanks Ram

    ReplyDelete
  4. christopherJune 16, 2017 at 10:12 PM

    If you want to prepare for CCNA 100-105 question answers, I would recommend the following, you can try its demo for free to check the quality of the product.

    Watching video and sharing,
    Cisco 100-105 Dumps - 100-105 Question Answer - Dumps4download

    ReplyDelete
  5. AnnadeenSeptember 28, 2017 at 5:08 AM

    Among many of the 100-105 dumps and 100-105 question answers providers, Pass4surekey is the foremost and valid 100-105 braindumps provider which presents excellent quality 100-105 questions answers for Cisco certification candidates. Our 100-105 dumps are consist of professionally planned and verified 100-105 questions answers. All 100-105 exam questions are latest and verified by IT experts.Our 100-105 PDF will further enhance your exam preparation and bless you with brilliant success.

    ReplyDelete
  6. Jessica EllisJanuary 12, 2018 at 1:41 AM

    In the end this is a very simple system, thank you a lot for explanation. The initial TTL packet value for an IP packet is 255 and then it is decremented by 1 each time it encounters a router. When this value reaches 0, the packet is discarded by a router. The TTL value is contained in each IP packet including ICMP packets. And what is about one hour translation review ? Does the algorithm vary?

    ReplyDelete
  7. Richard RichiFebruary 18, 2020 at 10:58 AM

    It was possible for me only with the help of real 100-105 exam dumps material that I successfully passed my final IT exam. Experts with strong prowess have developed this material at the platform of DumpsSure.com. I am thankful to the whole team for their useful gift like Cisco 100-105 study guide to the IT students.

    ReplyDelete

Post a Comment

Popular posts from this blog

New Questions in CCNA 200-120 (HSRP, VRRP, NetFlow, SNMP)

The below are mock questions that were about to appear in exam CCNA 200-120. Updated : 14 th October 2013 Download the Latest 200-120 dumps : Click Here This file requires Visual Cert Exam Suite: Click Here Download the latest 200-120 dumps in DOCX format : Chapter 1 , Chapter 2 , Chapter 3 , Chapter 4 , Chapter 5, Chapter 6, Chapter 7, Chapter 8 , Chapter 9, Chapter 10, Chapter 11, Chapter 12 CCNA EIGRP Simulation CCNA ACL2 Simulation Question 1 Which three are the components of SNMP? (Choose three) A. MIB B. SNMP Manager C. SysLog Server D. SNMP Agent E. Set Answer : A, B, D Question 2 What are the Popular destinations for syslog messages to be saved? A. Flash B. The logging buffer .RAM C. The console terminal D. Other terminals E. Syslog server Answer: B, C, E Question 3 Syslog was configured with a level 3 trap. Which 3 types of logs would...
121 comments
Read more

Cisco Packet Tracer Multi User Connection

Multiuser communication allows multiple point-to-point (peer) connections between multiple instances of Packet Tracer. By allowing communication between Packet Tracer instances, a new door has been opened to a fun, interactive, social, collaborative, and competitive learning environment. Instructors will now be able to create a variety of activities for students to learn in groups that will facilitate greater social interaction between students. Students will benefit from this environment by working together to solve problems and share ideas. Both students and teachers should take full advantage that Multiuser will offer in their learning environment. Technical Information Communicates between instances using PTMP. PTMP is TCP based. By default, uses TCP port 38000, is customizable, and each new instances on the same PC will use the next available port. On by default. UPnP will attempt to establish port forwarding to facilitate home networks. All network co...
2 comments
Read more

CCNA RIPv2 Simulation

Central Florida Widgets recently installed a new router in their Apopka office. Complete the network installation by performing the initial router configurations and configuring RIPv2 routing using the router command line interface (CLI) on the Apopka router. To configure the router (Apopka) click on the console host icon that is connected to a router by a serial console cable (shown in the diagram as a dashed black line). Each of the windows can be minimized by clicking on the [-]. You can also reposition a window by dragging it by the title bar. The “Tab” key and most commands that use the “Control” or “Esc” keys are not supported and are not necessary to complete this simulation. The help command does not display all commands of the help system. Configure the router per the following requirements: Name of the router is Apopka Enable-secret password is ish555ana The password to access user EXEC mode using the console is New2Rtr The password to allow te...
14 comments
Read more