Answer is NO
Example :
Drag the options on the left under the type of switch port that they describe on the right.
Answer is
You just have to drag the features from the left to the appropriate port on the right. There is no specification in the question about move the question in appropriate order. If you put carries traffic for a single VLAN in third place of Access Port. In real exam this is not an error.
But in this VCE software, if we put carries traffic for single VLAN in the third place of Access Port, then it marked the question as Wrong.
So cheers guys.
An administrator is trying to ping and telnet from Switch to Router with the results shown below: For this question we only need to use the show running-config command to answer all the questions below: Router>enable Router#show running-config Question 1 Which will fix the issue and allow ONLY ping to work while keeping telnet disabled? A. Correctly assign an IP address to interface fa0/1 B. Change the ip access-group command on fa0/0 from “in” to “out” C. Remove access-group 106 in from interface fa0/0 and add access-group 115 in. D. Remove access-group 102 out from interface s0/0/0 and add access-group 114 in E. Remove access-group 106 in from interface fa0/0 and add access-group 104 in Answer : E Explanation: The question was not about FTP so skip line #1 and line #2. The line #3 denies telnet traffic and line #4 permits icmp-echo traffic. L...
Comments
Post a Comment